|

Live
the easy life with AEI Security's range of home automation products
AEI
Security's range of 'Remote Automation' products have been designed for
the D.I.Y. and professional user with a strong emphasis on ease of installation
and operation. The products can be fitted without any need for disturbance
to existing wiring circuits.
Electrical
products around the home can be operated from a central location or by
remote control from any area of the house at distances up to 25 metres.
Additional wall switches can be added around the home eliminating expensive
wiring.
Our
OEM range of products provide the designer with an easy means of incorporating
remote control operation to just about any application.
All
products operate using radio frequency (R.F.) technology which allows
the remote controls and wall plates to operate through walls and ceilings.
A custom manufactured integrated circuit is at the heart of each transmitter
and receiver, factory pre-set to one of 256 combinations. The operating
frequency is governed in the U.K. by the Radio Communications Agency and
use of the products is permitted through AEI's extensive hold of License
Exemption certificates. All products comply with relevant British Safety
Standards.
 |
Plug
in adaptor units
The
RA and RD series provides an easy means of upgrading any mains operated
appliance to remote control.
|
 |
Bulb
fitting adaptor units
The
BF Series provides you with a simple means of converting a bulb
holder to remote control on/off, or to a dimmer function. It is
supplied complete with a handy remote control.
|
 |
OEM
Wire-in remote modules
The
RM,RMD and FL series are a range of small modules designed to work
at mains voltage levels switching up to 3 mains powered appliances
on and off and providing dimmer function on some models.
|
 |
This
is a revolutionary new design in P.I.R. lighting control, which
enables a conventional single pole wall switch to be replaced with
a movement activated detector.
|
 |
Remote
controlled wall plates
A
range of totally wire-free wall plates incorporating the same transmission
electronics as the remote controllers. It not only converts lighting
to remote control but also adds additional self contained light
switches.
|

|